What’s the difference between “switchport mode access” and “switchport access vlan xx”? First of all, both commands are required to set the switch to an access port. switch(config-if)# switchport mode access This above command disables DTP – Dynamic Trunking Protocol…
When setting up a Cisco ASA failover pair, try to follow the following rules & tips: Do not use a crossover Ethernet cable or a fiber-optic patch cable to directly connect the two failover LAN interfaces if the firewalls are…
Today, I wanted to remind myself of all the funky little Cisco spanning tree protection features. I found this neat picture that summarizes it all: